Filter
Top Products
Operational Features
41-001160-03, Rev 00, Releaes 2.4 5-93
Configuring Operational Features
Reference
For more information, see the section, “Do Not Disturb (DND)” on page 5-211.
Call Forward Mode
Call Forward (CFWD) on the IP phone allows incoming calls to be forwarded to
another destination. The phone sends the SIP message to the SIP proxy, which
then forwards the call to the assigned destination.
An Administrator or User can configure CFWD on the phone-side by setting a
mode for the phone to use (Account, Phone, or Custom). Once the mode is set,
you can use the IP Phone UI to use the CFWD feature at Options->Call Forward
or by pressing a configured Call Forward softkey/programmable key/extension
module key.
The following describes the behavior for each CFWD mode.
• Account mode - The account mode allows you to configure CFWD on a per
account basis. Pressing a configured CFWD key applies to the account in
focus.
• Phone mode - The Phone mode allows you to set the same CFWD
configuration for all accounts (All, Busy, and/or No Answer). When you
configure the initial account, the phone applies the configuration to all other
accounts. (In the Aastra Web UI, only the account you configured is enabled.
All other accounts are grayed out but set to the same configuration.) Using the
Aastra Web UI, if you make changes to that initial account, the changes apply
to all accounts on the phone.
3 Configure a DND key on the phone using the procedures in the section, “Do Not Disturb (DND)” on
page 5-211.
4 Click to save your changes.
The change takes effect immediately without a reboot.
Aastra Web UI
Draft 1