Filter
Top Products
Operational Features
41-001160-03, Rev 00, Releaes 2.4 5-285
Configuring Operational Features
5 Select a state for the selected account(s) using the UP and DOWN arrow keys.
You can enable/disable any or all of the following states for a specific account or for all accounts (with
individual configurations):
• All - Enables CFWD All for an account and forwards all incoming calls for that account, to the
specified number. The phone number can be different between accounts.
• Busy - Enables CFWD Busy for an account and forwards incoming calls to a specified number if
DND has been enabled for that account OR if that account is currently engaged in another call.
The phone number can be different between accounts.
• No Answer - Enables CFWD NoAns for an account and forwards incoming calls to a specified
number if the call has not been answered for a specified number of rings. The phone number can
be different between accounts.
Note: If CFWD All AND CFWD Busy AND CFWD NoAns are all enabled (and/or if the account has
DND enabled), the CFWD All settings take precedence over CFWD Busy and CFWD NoAns.
You can also use the following keys if required:
All Off Key- Disables all CFWD states for the selected account.
All On Key - Enables all CFWD states for the selected account.
CopytoAll Key - Copies the call forward phone number and state of the selected Call Forward mode
(All, Busy, No Answer) to every Call Forward mode of that account. For example, if you have the
cursor pointing at the “All” state and it is enabled and has a call forward phone number configured,
pressing the CopytoAll Key enables the Busy state and the NoAns state and assigns the same
phone number to both states.
Cancel Key - Cancels any configuration you may have made without saving. To cancel a
configuration, you must press this CANCEL key before pressing the DONE key.
Aastra IP Phone UI
Step Action
Draft 1