Filter
Top Products
Operational Features
5-88 41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
Aastra Web UI
1 Click on Basic Settings->Preferences->General.
2The "UPnP Mapping Lines" field is set to 0 by default. If required, change the setting to a specific
line by selecting a line from the list. Valid values are 0 through 10. The line you select is the line that
your remote phone uses to perform Universal Plug and Play on the network you are connecting to.
3 Click to save your changes.
Draft 1