Filter
Top Products
Operational Features
5-300 41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
• You can use any spreadsheet application to open the file for viewing. The
following is an example of a Directory List in a spreadsheet application. This
is an administrator and user function.
The file displays the name, phone number(s), and line number(s) for each
Directory entry.
Enabling/Disabling Directory List
You can enable and disable user access to the Directory List on the IP phones
using the following parameter in the configuration files:
• directory disabled
Valid values for this parameter are 0 (enabled) and 1 (disabled). If this parameter
is set to 0, the Directory List can be accessed by all users. If this parameter is set
to 1, the Directory List does not display on the IP phone and the Directory key is
disabled. On the 9143i, 6751i, and 6753i, the "Directory" option is also removed
from the "Services" menu.
Use the following procedures to enable/disable the Directory List on the IP
phones.
Configuration Files
For specific parameters you can set in the configuration files for enabling/disabling the Directory List, see
Appendix A, the section, “Directory Settings” on page A-123.
Draft 1