Filter
Top Products
Network Settings
41-001160-03, Rev 00, Releaes 2.4 4-59
Configuring Network and Session Initiation Protocol (SIP) Features
.
Aastra Web UI
Step Action
1 Click on Advanced Settings->Network->Type of Service,DSCP.
2 Select a Protocol field:
•“SIP”
or
•“RTP”
or
•“RTCP”
3 Enter a value from 0 to 63. Default values are as follows:
SIP = 26
RTP = 46
RTCP = 46
Note: If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map
the applicable priority to the Protocol setting as shown in the table “DSCP Range/VLAN Priority” on
page 4-60 For more information, see the section “Configuring VLAN (optional)” on page 4-60.
4 Click to save your settings.
Draft 1