Filter
Top Products
Administrator Level Options
3-26 41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
Group Paging RTP Settings
Key Mapping
Parameter in
Aastra Web UI
Parameter in
Configuration Files
Description
Paging listen addresses
Note: This option can
be set by both Users
and Administrators.
paging addr list Allows you to specify up to 5 listening multicast
addresses to send/receive a Real Time Transport
Protocol (RTP) stream to/from these pre-configured
multicast address(es) without involving SIP signaling.
For more information on this feature, see “Group
Paging RTP Settings” on page 5-107.
Parameter in
Aastra Web UI
Parameter in
Configuration Files
Description
Map Redial Key To map redial key to Sets the Redial key as a speeddial key if a value is
entered for this parameter. If you leave this parameter
blank, the Redial key returns to its original
functionality.
Note: If you configure the Redial key for speeddialing
on the 9480i CT or 6757i CT Base Stations, the Redial
key on the 9480i CT and 6757i CT handsets retain
their original functionality. The Redial key on the
handset is not configured for speeddial.
For more information on this feature, see “Key
Mapping” on page 5-113.
Map Conf Key To map conf key to Sets the Conf key as a speeddial key if a value is
entered for this parameter. If you leave this parameter
blank, the Conf key returns to its original functionality.
Note: If you configure the Conf key for speeddialing
on the 9480i CT or 6757i CT Base Stations, the Conf
key on the 9480i CT and 6757i CT handsets retain
their original functionality. The Conf key on the
handset is not configured for speeddial.
For more information on this feature, see “Key
Mapping” on page 5-113.
Draft 1