Psion Teklogix 8100107B PDAs & Smartphones User Manual


 
Chapter 3: Getting To Know The WORKABOUT PRO
Chargers And Docking Stations
28 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual
Important: The backup battery is trickle charged from the main battery. To
maximize battery life, avoid excessive discharging and recharging
of the backup battery by keeping the main battery fully charged.
IF YOU ARE POWERING UP A NEW UNIT, a warning message
may appear on the screen indicating that the backup battery
capacity is low. To recharge the backup battery, you must fully
charge the WORKABOUT PRO with
the main battery installed in
the
unit. An overnight charge is recommended.
3.3.4.1 Chargers And Docking Stations
Important: FOR DETAILED INFORMATION about chargers and docking
stations, refer to Chapter 9: Peripheral Devices & Accessories
beginning on page 297.
For battery safety, refer to “Lithium Ion Battery Safety Precau-
tions” beginning on page XVIII.
Lithium Ion battery packs must be charged before use. These batteries can be
charged with a variety of chargers and docking stations. These include:
Desktop Docking Station (Model WA4002-G1 for the WORKABOUT
PRO C & Model WA4102-G1 for the WORKABOUT PRO S)—operates
as both a charger and a docking station. Operating as a charger, both the
battery installed in the hand-held and a spare battery can be charged simul-
taneously.
Quad Docking Station (Model #WA4004-G1)—can charge the battery of
up to four WORKABOUT PROs inserted in the docking station.
Single Battery Charger (Model #WA3001-G1)—charges a single battery.
Quad Battery Charger (Model #WA3004-G1)—charges up to four spare
Standard or High-Capacity WORKABOUT PRO battery packs.
It can take up to 5 hours to charge a battery. The WORKABOUT PRO intelligent
charging system protects the battery from over-charging by terminating the charge
process when the battery is at maximum capacity.
Note: Refer to “Monitoring The Battery And Maximizing Run Time” on page 39
for additional information about the battery.
Important: To avoid damaging the battery, chargers will not begin the charge
process until the battery temperature is between 0° C to 45 °C
(32° F to 113° F).