Filter
Top Products
Section 700 - Operation Chapter 4. User Maintenance
576-13-700 DBS 576 (USA), Revised 6/11/98 93
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
Set Special Day Mode
Description
(For a description of Automatic Day/Night System Mode, see “Automatic Day/Night Mode” on page
39.)
You can specify up to 20 special days for the System. For each special day, you can specify up to 5
modes settings.
Operation
To set the Special Day Modes:
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT
displays
2. At the
81
level, enter
07
.
3. Press the
HOLD
key.
8107-
S
y
stem Mode
displays
4. Enter
1
.
5. Press the
HOLD
key.
1-
Mode S
p
ecial Da
y
displays
6. Press the
HOLD
key.
1000 :MMDD
S
p
ecial Da
y
01
displays
7. Enter
the date by month (two characters) and day (two char-
acters) for the Special Day 1.
Note:
To clear an entry or existing data, press the
FLASH
key.
8. Press the
HOLD
key.
1001 :HHMM
S Da
y
01-1 Start
displays
9. Enter the start time in hours (two characters) and minutes
(two characters) for mode 1.
Note:
To clear an entry or existing data, press the
FLASH
key.