Filter
Top Products
90 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 4. User Maintenance Section 700 - Operation
•N/A
Considerations
•N/A
Set Message Key ID Code
Description
(For a description of the Message Key ID Code Feature, see “Message Key ID Code” on page 70.)
On a large display phone you can use a Message key to either retrieve voice mail messages or respond
to telephone messages. To respond to voice mail messages from a 3rd party voice mail system, you
need to set the Message Key ID code to identify the caller to the voice mail system. You can also use
the Message key to program a voice mail password.
Operation
To set the Message Key ID code:
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT
displays
2. At the
81
level, enter
06
.
3. Press the
HOLD
key.
8106-
MSG Ke
y
ID Code
displays
4. Press the
HOLD
key.
MSGID-EXT Numbe
displays
5. Dial the extension number of the phone being programmed.
6. Press the
HOLD
key.
MSG-ID EXT XXX
displays (where
XXX = extension number)
7. Enter the Message Key ID code.
Notes:
The ID code may contain up to 16 digits and contain
0
,
1
-
9
,
*
,
#
, pause (
REDIAL
key).
To clear an entry or existing data, press the
FLASH
key.
8. Press the
HOLD
key to store the entry. Next extension number displays
9. To set additional Message Key ID codes, press the volume
up or down key or press the
HOLD
key to move to the
desired extension.
Desired extension number displays
10. Repeat steps 7-9 until all Message Key ID codes are set.
11. Press the
AUTO
key to exit the entry mode.
MSGID - EXT Numbe
displays
12. To return to the top menu level (
81
), press the
PROG
key.
OR...
To exit the User Maintenance mode, press the
ON/OFF
key.
81-
User MAINT
displays
OR...
ON/OFF
LED goes off