Filter
Top Products
102 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 4. User Maintenance Section 700 - Operation
Operation
To set the Day of Week Modes:
Table 12. Day of the Month - addresses
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT
displays
2. At the
81
level, enter
07
.
3. Press the
HOLD
key.
8107-
System Mode
displays
4. Enter
3
.
5. Press the
HOLD
key.
3-
D of Week PTN
displays
6. Press the
HOLD
key.
300 :
1st SUN Pattern
displays
7. Enter
pattern (
0
- no pattern,
1
- pattern 1,
2
- pattern 2,
3
-
pattern 3) for the first Sunday.
Note:
To clear an entry or existing data, press the
FLASH
key.
8. Press the
HOLD
key to store the entry. Next Day of Week mode displays
9. To set additional Day of Week modes, press the volume up
or down key or press the
HOLD
key to move to the desired
mode.
Desired Day of Week mode displays
10. Repeat steps 7-9 until the remaining days in the month are
set.
Note
: The entry positions are listed in Table 12 on page
102.
11. Press the
AUTO
key to exit the entry mode.
3-
D of Week PTN
displays
12. To return to the top menu level (
81
), press the
PROG
key.
OR...
To exit the User Maintenance mode, press the
ON/OFF
key.
81-
User MAINT
displays
OR...
ON/OFF
LED goes off
ADDRESSES
FOR THESE
DAYS OF THE
WEEK:
-- DAY OCCURRENCE --
(e.g., 1st Sunday=address 300; 2nd Sunday=address 307)
1st 2nd 3rd 4th 5th
Sunday
300 307 314 321 328
Monday
301 308 315 322 329