Filter
Top Products
254 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 7. SLT Features Section 700 - Operation
• The attendant pilot number is flexible.
• If a member of an attendant group is for a virtual extension, multiple extensions in the attendant
group can be made to ring at once when the virtual number is dialed.
• Attendant calls are always tone calls (i.e., not voice calls).
Busy Override
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
Busy Override allows you to break into another user’s outside or intercom calls to relay urgent
information or to create three-party conference calls.
Operation
To set Extension Busy Override:
Hardware Requirements
•N/A
Related Programming
• FF1-0-01: Splash Tone (Busy Override)
• FF1-0-03: Extension COS (Manual DND Override Send)
• FF1-0-03: Extension COS (Forced DND Override)
• FF1-2: Dial Plan
• FF3: Extension COS
• FF3: Data Security
Considerations
• You cannot break in on three-party conference calls.
• The default for the override alert tone is off. If the override alert tone is enabled, the tone will be
sent to both parties when a call is overridden.
Action Result
1. Lift the handset. Intercom dial tone
2. Dial the extension number. Busy tone
3. Enter the Busy Override code (default =
9
). • Alert tone sounds to both extensions
(System programming required)
• Connection to both parties