Filter
Top Products
214 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Call Forward/All/Busy/No-Answer and DND Cancel)
• FF1-0-03: Extension COS (Call Forward/All Calls)
• FF1-0-03: Extension COS (Call Forward/Busy)
• FF1-0-03: Extension COS (Call Forward/No Answer)
• FF1-0-03: Extension COS (Call Forward/Other)
• FF1-2: Dial Plan
Considerations
• Calls cannot be forwarded to an extension that already has Call Forwarding DND activated.For
example, extension 220 can only forward to extension 225 if 225 is not forwarded.
• If forwarding to an outside number, the destination number must be pre-programmed into a
System Speed Dial (SSD) code.
• Call Forwarding - Busy and Call Forwarding - No Answer can both be set at the same time.
• You can set Call Forwarding - All Calls while Call Forwarding - No Answer and/or Call
Forwarding - Busy are set. Canceling one mode only affects that mode; however, the other
modes will remain set until canceled individually.
• An auto camp-on to a busy extension will forward to the Call Forward No Answer destination. A
manual camp-on to a busy extension will not forward.
• If Call Forwarding No Answer and DND are both set, calls immediately forward to the Call
Forward No Answer destination.
• You can cancel both Call Forwarding and DND by entering 7 * *.
Call Hold
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
The system provides the following types of Call Hold:
• System Hold
• Floating Hold
• Exclusive Hold
• Broker’s Hold
• Call Park (Station)
System Hold
You can place either an outside or intercom call on System Hold. You can retrieve a call placed on
System Hold from any extension that has a line appearance for the held call.