Filter
Top Products
Section 700 - Operation Chapter 4. User Maintenance
576-13-700 DBS 576 (USA), Revised 6/11/98 85
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
5. Press the
HOLD
key.
2 :
SSD Index
displays
6. Press the
HOLD
key.
Enter Index #
displays
7. Enter the SSD Index number (
1 - 2
).
8. Press the
HOLD
key.
A B C D E F XXX
displays (where
XXX = SSD bin number)
9. Enter the SSD Index name:
• If using a
large-display phone
, press the soft key next
to the desired row of letters. (See Example 1 on page
79.)
• If using a
small-display phone
press the appropriate
one-touch key. (See Example 2 on page 80.)
Note:
Press the
FLASH
key to clear any existing data.
10. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-display phone on page 79.
• See Example 2. Small-display phone on page 80.
Notes:
• Press the
*
key to erase a single entry.
• Press the
#
key to enter a space.
11. Repeat steps 9-10 as many times as necessary to enter the
desired SSD name.
Note:
Press the
FLASH
key to clear the entire entry.
12. Press the
HOLD
key to store the entry. Next SSD index number displays
13. To set additional SSD index names, press the volume up or
down key or press the
HOLD
key to move to the desired
SSD.
Desired SSD index number displays
14. Repeat steps 9-13 until all SSD indexes are entered.
15. Press the
AUTO
key to exit the entry mode.
Enter SSD #
displays
16. To return to the top menu level (
81
), press the
PROG
key.
OR...
To exit the User Maintenance mode, press the
ON/OFF
key.
81-
User MAINT
displays
OR...
ON/OFF
LED goes off
Action Result