Filter
Top Products
Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98 211
Operation
To set Call Forwarding-All Calls:
To cancel Call Forwarding-All Calls:
Call Forwarding - Busy
When Call Forwarding - Busy is set, all incoming calls to a busy extension are forwarded.
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. Enter the appropriate Set Call Forwarding code:
• For your extension, enter
721
.
• For another extension, enter
741
.
3. If setting Call Forwarding for another extension, dial the
number of the extension whose calls you wish to forward.
4. Enter the destination number:
• If forwarding to another extension, dial the extension
number.
• If forwarding to an outside number, press the
#
key then
enter the SSD bin number.
Note:
Any outside number used for Call Forwarding must
already be programed into speed dialing. (For instructions,
see “Speed Dialing” on page 238.)
5. Replace the handset or press the
ON/OFF
key.
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. Enter the appropriate Cancel Call Forwarding code:
• For your extension, enter
731
.
• For another extension, enter
751
.
3. If canceling Call Forwarding for another extension, dial the
extension number.
4. Replace the handset or press the
ON/OFF
key.