Filter
Top Products
Section 700 - Operation Chapter 7. SLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98 287
Operation
To seize an idle trunk:
Hardware Requirements
•N/A
Related Programming
• FF1: MCO Access
• FF5-2: MCO Trunk Group (Outbound)
• FF7: ARS/TRS
Considerations
• The System supports up to 576 outside lines in a six-cabinet configuration. These lines can be
divided into 99 different trunk groups.
• Each trunk group can support up to 50 outside lines.
• Each MCO Tenant Group can have up to 5 MCO trunk access codes. System defaults for MCO
trunk access codes are displayed in the following table.
• MCO1 can have up to 5 trunk groups assigned by the Advanced Trunk Group feature.
• MCO1 access code is used for Automatic Route Selection (ARS) access code.
Table 16. MCO Trunk Access Codes
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the desired trunk access number (
9
or
81
-
84
). (See
Table 16 on page 287.)
Outside dial tone
3. Dial the phone number.
MCO Group Trunk Access Code
MCO1 9
MCO2 81
MCO3 82
MCO4 83
MCO5 84