Filter
Top Products
120 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
Call Forwarding
CPC-96, CPC-288, and CPC-576 All Versions
Description
Call Forwarding allows you to send your calls to another extension, to an outside line, or to Voice
Mail. Call Forwarding can be set or canceled under the following conditions from either your own
extension or from an alternate extension:
• Call Forwarding - All Calls
• Call Forwarding - Busy
• Call Forwarding - No Answer
Call Forwarding-All Calls
When Call Forwarding - All Calls is set, all incoming calls to an extension are immediately
forwarded.
Operation
To set Call Forwarding-All Calls:
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. Enter the appropriate Set Call Forwarding code:
• For your extension, enter
721
.
• For another extension, enter
741
.
3. If setting Call Forwarding for another extension, dial the
number of the extension whose calls you wish to forward.
4. Enter the destination number:
• If forwarding to another extension, dial the extension
number.
• If forwarding to an outside number, press the
#
key then
enter the SSD bin number.
Note:
Any outside number used for Call Forwarding must
already be programed into speed dialing. (For information,
see “Speed Dialing” on page 179.)
5. Replace the handset or press the
ON/OFF
key.