Filter
Top Products
180 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
To dial a PSD number by entering the speed dial bin number:
To check a PSD number:
To delete a PSD number:
Hardware Requirements
•N/A
Related Programming
• FF8-1: PSD Numbers
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. If necessary, access an outside line. Outside dial tone
3. Press the
AUTO
key.
OR...
Enter the Speed Dial Originate code (default =
80
).
4. Enter the PSD bin number (
80-99
).
5. Complete the call and replace the handset or press the
ON/
OFF
key.
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. Press the
CONF
key.
C
displays
3. Press the
AUTO
key.
4. Enter the PSD bin number (
80-99
). Programmed data displays
5. If you want to check the next PSD number, press the
HOLD
key.
6. Replace the handset or press the
ON/OFF
key.
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. (A) Press the
PROG
key.
(B) Press the
AUTO
key.
OR...
(A) Enter the Speed Dial Set/Clear code (default =
710
).
3. Enter the PSD bin number (
80-99
).
4. Press the
HOLD
key.
Cleared Spd Dial
displays
5. Replace the handset or press the
ON/OFF
key.