Filter
Top Products
Section 700 - Operation Chapter 4. User Maintenance
576-13-700 DBS 576 (USA), Revised 6/11/98 91
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
Set Mode Schedule
Description
(For a description of Automatic Day/Night System Mode, see “Automatic Day/Night Mode” on page
39.)
You can set the System to automatically enter None, Day 1, Day2, Night, Night (1), or Night (2)
modes based upon mode patterns. You can define up to 3 patterns with up to 5 modes for each day.
(This menu allows the setting of the patterns.)
Operation
To set the Mode Schedule:
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT
displays
2. At the
81
level, enter
07
.
3. Press the
HOLD
key.
8107-
S
y
stem Mode
displays
4. Press the
HOLD
key.
0-
Mode Schedule
displays
5. Press the
HOLD
key.
000 :HHMM
PTN 1-1 Start T
displays
6. Enter
the start time in hours (two characters) and minutes
(two characters) for the Pattern 1 - first
mode.
Note:
To clear an entry or existing data, press the
FLASH
key.
7. Press the
HOLD
key.
001 :
PTN 1-1 Mode
displays
8. Enter the desired mode for Pattern 1 - first (
0
- None,
1
-
Day 1,
2
- Day 2,
3
- Night,
4
- Night (1),
5
- Night (2)).
Note:
To clear an entry or existing data, press the
FLASH
key.