Filter
Top Products
168 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
Operation
To leave a message waiting indication:
To answer a message waiting indication (callback):
To cancel a callback message:
Note: Message waiting/callback messages may also be cancelled by either the originator or the
receiver by calling the other party.
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Message Wait set/cancel)
• FF1-0-03: Extension COS (Priority Message Wait set/cancel)
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. Dial the extension number.
3. While the phone is still ringing, or when you hear the busy
tone, enter the Message Wait Set code (default =
4
).
MSG Accepted
displays
4. Replace the handset or press the
ON/OFF
key. •
Message
lamp flashes at called exten-
sion
•
MSG EXT XXX
displays (where XXX
= calling extension number) or name
of calling extension displays at called
extension
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. Enter the Message Wait Callback code (default =
*6
) or
press the
MSG
key if using a large-display phone.
• Telephone automatically dials exten-
sion that sent the message waiting indi-
cation
•
Message
lamp goes off when your call
is answered
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. Enter the Callback Request Cancel code (default =
*5
) or
press the
MSG
key if using a large-display phone.
MSG Cleared
displays
3. Replace the handset or press the
ON/OFF
key.
Message
lamp goes off