Panasonic 524X07801B Telephone User Manual


 
252 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 7. SLT Features Section 700 - Operation
Verified Account Codes
Stations restricted from outside call origination by Toll Restriction Service (TRS) can be
allowed to make outgoing calls by entering a Verified Account code that changes the TRS.
After a call is made, the SMDR record for the call will show the verified account code.
Operation
To make an outside call that requires an account code:
Hardware Requirements
An SMDR printer or external call accounting system is required to collect account code records.
Related Programming
FF1-0-19: TRS Class for Forced Account Code
FF1-2: Dial Plan
FF3: Forced Account
FF3: Verified Account
FF8-1-04: Verified Account Codes with TRS Class
Considerations
Account codes are not available during conversation recording mode for the Built-In Voice Mail.
Even though up to 10 digits may be entered, the system verifies the ID based on the first 4 digits
only.
Account codes will be cancelled after using CO queuing.-
Account codes are not available for a Dial Pulse SLT.
SLT telephones can only use account codes with outgoing calls only.
3. Enter the Account Code (up to 10 digits).
4. Press the
#
key.
5. Enter a trunk access code.
6. Dial the phone number.
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the Verified Account ID code (default =
8#
).
3. Enter the Account Code (max. 10 digits).
4. Press the
#
key.
5. Enter a trunk access code.
6. Dial the phone number.
Action Result