Filter
Top Products
118 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
Operation
To break into a call with a line appearance on your phone (CO Key Busy Override):
To use Extension Busy Override:
Hardware Requirements
•N/A
Related Programming
• FF1-0-01: Splash Tone (Busy Override)
• FF1-0-03: Extension COS (Manual DND Override Send)
• FF1-0-03: Extension COS (Forced DND Override)
• FF1-2: Dial Plan
• FF3: Extension COS
• FF3: Data Security
Considerations
• You cannot break in on three-party conference calls.
• The default for the Override Alert Tone is off. If the Override Alert Tone is enabled, the tone will
be sent to both parties when a call is overridden.
Action Result
1. Press the lit direct CO key. • Alert tone sounds to both phones (Sys-
tem programming required)
• Connected to both parties
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. Dial the extension number. • Dialed extension number displays
• Busy tone
3. Enter the Busy Override code (default =
9
). • Alert tone sounds to both extensions
(System programming required)
• Connection to both parties
•
OVR1:
(name of overriding exten-
sion)
and
OVR2:
(extension name for
current talk path)
displays on both
extensions