Filter
Top Products
184 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
Operation
To link multiple SSD numbers to a PSD bin:
To use a PSD Key that links multiple SSDs:
To manually link speed dial keys together:
Hardware Requirements
•N/A
Action Result
1. Determine the SSD bin numbers to be linked
2. Lift the handset or press the
ON/OFF
key.
3. (A) Press the
PROG
key.
(B) Press the
AUTO
key.
OR...
(A) Enter the Speed Dial Set/Clear code (default =
710
).
4. Enter the PSD bin number (
80
-
90
).
Enter Spd Dial
displays
5. Press the
AUTO
key.
6. Enter the SSD bin number (
00
-
79
or
000
-
799
) that contains
the first part of the number to be dialed.
7. Repeat steps 5-6 up to 5 more times for all additional SSDs
to be dialed.
8. Press the
HOLD
key when finished.
Stored PSDXXX
displays
Action Result
1. If necessary, select the trunk group (
9
,
81
-
84
). (Normally
the trunk is selected by the speed dial numbers.)
2. Press the PSD key.
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. If necessary, access an outside line.
3. If you are using a PSD number, press the one-touch key for
the first part of the number.
If you are using an SSD number, press the
AUTO
key, then
enter the SSD bin number.
4. Use the one-touch keys or press the
AUTO
key and enter
the SSD codes to dial the parts of the phone number until it
is completed.