Filter
Top Products
Section 700 - Operation Chapter 4. User Maintenance
576-13-700 DBS 576 (USA), Revised 6/11/98 89
Set Call-Forward ID Codes for Voice Mail
Description
(For a description of Call Forward ID codes for Voice Mail, see “Call Forward ID Code for Voice
Mail” on page 68.)
Voice Mail Call-Forward ID codes are used by voice mail systems to identify the correct mail box for
storing messages. The actual entry needed will vary by voice mail systems and configuration. Often
the entry is the extension number.
Operation
To set the Call Forward ID code:
Hardware Requirements
•N/A
Related Programming
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT
displays
2. At the
81
level, enter
05
.
3. Press the
HOLD
key.
8105-
C.FWD ID Code
displays
4. Press the
HOLD
key.
CF ID-EXT Numbe
displays
5. Dial the extension number.
6. Press the
HOLD
key.
CF-ID EXT XXX
displays (where
XXX = extension number)
7. Enter the Call Forward ID code.
Notes:
The ID code may contain up to 16 digits and contain
0
,
1
-
9
,
*
,
#
, pause (
REDIAL
key).
To clear an entry or any existing data, press the
FLASH
key.
8. Press the
HOLD
key to store the entry. Next extension number displays
9. To set additional Call Forward ID codes, press the volume
up or down key or press the
HOLD
key to move to the
desired extension.
Desired extension displays
10. Repeat steps 7-9 until all Call Forward ID codes are set.
11. Press the
AUTO
key to exit the entry mode.
CF ID-EXT Numbe
displays
12. To return to the top menu level (
81
), press the
PROG
key.
OR...
To exit the User Maintenance mode, press the
ON/OFF
key.
81-
User MAINT
displays
OR...
ON/OFF
LED goes off