Filter
Top Products
82 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 4. User Maintenance Section 700 - Operation
Set System Speed Dial Numbers
Description
For a description of System Speed Dial (SSD), see “System Speed Dial” on page 181 for a Digital
Key Telephone, “System Speed Dial” on page 240 for a Digital Single Line Telephone (DSLT), and
“System Speed Dial” on page 283 for a Single Line Telephone (SLT).
Operation
To set SSD numbers:
Hardware Requirements
•N/A
Related Programming
•N/A
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT
displays
2. At the
81
level, enter
02
.
3. Press the
HOLD
key.
8102-
SSD Assi
g
nment
displays
4. Press the
HOLD
key.
0 :
SSD Number
displays
5. Press the
HOLD
key.
Enter SSD #
displays
6. Enter the SSD bin number (
00
-
79
or
000
-
799
).
7. Press the
HOLD
key.
-SSDXXX XXX
displays (where
XXX = SSD bin number)
8. Enter the SSD digits to be dialed.
Note:
Press the
FLASH
key to clear an entry or any exist-
ing data.
9. Press the
HOLD
key to store the entry. Next SSD bin number displays
10. To set additional SSD numbers, press the volume up or
down key or press the
HOLD
key to move to the desired
SSD.
Desired SSD bin number displays
11. Repeat steps 8-10 until all SSDs are entered.
12. To return to the top menu level (
81
), press the
PROG
key.
OR...
To exit the User Maintenance mode, press the
ON/OFF
key.
81-
User MAINT
displays
OR...
ON/OFF
LED goes off