Filter
Top Products
Section 700 - Operation Chapter 3. System Features
576-13-700 DBS 576 (USA), Revised 6/11/98 39
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
• Day and Night modes can be assigned to FF keys on a phone. You can switch between Day 1,
Day 2, Night, Night 1, and Night 2 modes simply by pressing the appropriate key. The FF key
lights red when the System is in the assigned mode. Alternatively a Day/Night toggle mode key
can be assigned. Pressing the key toggles between modes. When in Day mode, the FF key LED
is not lit. When in Night mode, the LED lights red.
Automatic Day/Night Mode
You can set the System to automatically enter a particular Day/Night mode determined by the time of
day. Each day of the month can be assigned 1 of 3 automatic system mode patterns. Each of the
patterns can be set to change modes up to 5 times per day.
Up to 20 special days can be programmed with up to 5 automatic mode changes for the day.
An Exception Day period is available for overriding the automatic mode for extended periods of time.
For instance, if an office is shut down for the week of July Fourth, the System can be programmed to
not operate in the automatic mode for those days. The System will stay in the same mode for the
period. The mode may be manually changed at any time.
For instance, the System can be set to automatically enter Day 1 mode at 8:00 a.m. on weekdays and
enter Night mode at 5:00 p.m. on weekdays. All incoming calls, TRS and attendant group handling
would change accordingly. On Saturday and Sunday, the System would stay in Night mode.
The Automatic Day/Night modes may be set in User Maintenance. See “Set Mode Schedule” on page
91, “Set Special Day Mode” on page 93, “Set Exception Day Mode” on page 99, and “Set Day of
Week Mode” on page 101.
Hardware Requirements
•N/A
Night 1 Mode
1. Press the
ON/OFF
key. Intercom dial tone
ON/OFF
LED lights
2. Enter
762
for the Night 1 Feature
code.
3. Press the
ON/OFF
key
ON/OFF
LED goes off
Red Night
LED goes off
Night 2 Mode
1. Press the
ON/OFF
key. Intercom dial tone
ON/OFF
LED lights
2. Enter
763
for the Night 2 Feature
code.
3. Press the
ON/OFF
key
ON/OFF
LED goes off
Red Night
LED goes off
Switch Mode Procedure Indication