Panasonic 524X07801B Telephone User Manual


 
256 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 7. SLT Features Section 700 - Operation
Call Forwarding - All Calls
Call Forwarding - Busy
Call Forwarding - No Answer
Call Forwarding-All Calls
When Call Forwarding - All Calls is set, all incoming calls to an extension are immediately
forwarded.
Operation
To set Call Forwarding-All Calls:
To cancel Call Forwarding-All Calls:
Call Forwarding - Busy
When Call Forwarding - Busy is set, all incoming calls to a busy extension are forwarded.
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the appropriate Set Call Forwarding code:
• For your extension, enter
721
.
• For another extension, enter
741
.
3. If setting Call Forwarding for another extension, dial the
number of the extension whose calls you wish to forward.
4. Enter the destination number:
• If forwarding to another extension, dial the extension
number.
• If forwarding to an outside number, press the
#
key then
enter the SSD bin number.
Note:
Any outside number used for Call Forwarding must
already be programed into speed dialing. (For instructions,
see “Speed Dialing” on page 276.)
5. Replace the handset.
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the appropriate Cancel Call Forwarding code:
• For your extension, enter
731
.
• For another extension, enter
751
.
3. If canceling Call Forwarding for another extension, enter
the extension number.
4. Replace the handset.