Filter
Top Products
Section 700 - Operation Chapter 3. System Features
576-13-700 DBS 576 (USA), Revised 6/11/98 55
SSD Names:
To set SSD names using a large-display or small-display phone:
3. Press the * key.
4. Enter 0 for the PSD Name Assignment mode.
A B C D E F P80
displays (where P80 =
PSD bin 80)
5. Press the up or down arrow key to display the desired PSD
bin number.
A B C D E F PXX
displays (where PXX
= desired PSD bin number)
6. Enter the extension name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
52.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 53.)
Note: Press the FLASH key to clear any existing data
7. Use the bottom row of FF keys to select a single letter.
• See “Example 1. Large-display phone” on page 52.
• See “Example 2. Small-display phone” on page 53.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
8. Repeat steps 6-7 as many times as necessary to enter the
desired PSD name.
Note: Press the FLASH key to clear the entire entry.
9. Press the HOLD key when finished. Next PSD bin number displays
10. To enter another speed dial name repeat steps 5-9.
Action Result
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the * key.
4. Enter 1 for the SSD Name Assignment mode.
SSD NO.=>
SSD NAME
displays
5. Enter the speed dial bin number (00-79 or 000-799).
6. Press the HOLD key.
-SSDXXX
A B C D E F XXX
displays (where XXX
= specified SSD bin number)
7. Press the FLASH key to clear the current data.
A B C D E F XXX
displays (where XXX
= specified SSD bin number)
Action Result