Filter
Top Products
Section 700 - Operation Chapter 3. System Features
576-13-700 DBS 576 (USA), Revised 6/11/98 51
Extension Name Assignments
Extension names can be up to 10 characters in length. (Assignment of extension names must be
allowed in the Extension COS.)
Operation
To set extension names using a large-display or small-display phone:
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. Press the
PROG
key.
3. Press the
*
key.
4. Enter
2
for the Extension Name Assignment mode.
EXT NO.=>
EXT NAME
displays
5. Enter the extension number.
6. Press the
HOLD
key.
XXX
A B C D E F XXX
displays (where
XXX = extension number)
7. Press the
FLASH
key to clear the existing data.
A B C D E F XXX
displays (where
XXX = extension number)
8. Enter the extension name:
• If using a
large-display phone
, press the soft key next
to the desired row of letters. (See Example 1 on page
52.)
• If using a
small-display phone
press the appropriate
one-touch key. (See Example 2 on page 53.)
9. Use the bottom row of FF keys to select a single letter.
• See “Example 1. Large-display phone” on page 52.
• See “Example 2. Small-display phone” on page 53.
Notes:
• Press the
*
key to erase a single entry.
• Press the
#
key to enter a space.
10. Repeat steps 7-8 as many times as necessary to enter the
desired extension name.
Note:
Press the
FLASH
key to clear the entire entry.
11. Press the
HOLD
key when finished. Next extension number displays
12. To enter another extension name, press the
CONF
key and
repeat steps 5-11.
EXT NO.=>
EXT NAME
displays