Filter
Top Products
Section 700 - Operation Chapter 4. User Maintenance
576-13-700 DBS 576 (USA), Revised 6/11/98 107
.
Operation
To set a Caller ID Logging Extensions using either a large-display or small-display phone:
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT
displays
2. At the
81
level, enter
10
.
3. Press the
HOLD
key.
8110-
CID Logging EXT
displays
4. Press the
HOLD
key.
CID Logging #
displays
5. Enter log control number.
6. Press the
HOLD
key.
7. Dial the extension number.
8. Press the
HOLD
key to store the entry. Next log control # displays
9. To set CID Log for additional extensions, press the volume
up and down key or press the
HOLD
key to move to the
desired Extension.
10. Repeat steps 6-8 until all extension are entered.
11. Press the
AUTO
key to exit the entry mode.
12. To return to the top menu level (
81
), press the
PROG
key.
OR...
To exit the User Maintenance mode, press the
ON/OFF
key.
81-
User MAINT
displays
OR...
ON/OFF
LED goes off