Filter
Top Products
78 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 4. User Maintenance Section 700 - Operation
Operation
To set PSD names using either a large-display or small-display phone:
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT
displays
2. At the
81
level, enter
01
.
3. Press the
HOLD
key.
8101-
PSD Assignment
displays
4. Enter
1
.
5. Press the
HOLD
key.
1 :
PSD Name
displays
6. Press the
HOLD
key.
EXT Number
displays
7. Dial the extension number.
8. Press the
HOLD
key.
Enter PSD # XXX
displays (where
XXX = dialed extension number)
9. Enter the PSD bin number (
80
-
99
).
10. Press the
HOLD
key.
A B C D E F PXX
displays (where
PXX = PSD number)
11. Enter the PSD name:
• If using a
large-display phone
, press the soft key next
to the desired row of letters. (See Example 1 on page
79.)
• If using a
small-display phone
press the appropriate
one-touch key. (See Example 2 on page 80.)
Note:
Press the
FLASH
key to clear any existing data.
12. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-display phone on page 79.
• See Example 2. Small-display phone on page 80.
Notes:
• Press the
*
key to erase a single entry.
• Press the
#
key to enter a space.
13. Repeat steps 11-12 as many times as necessary to enter the
desired speed dial name.
Note:
Press the
FLASH
key to clear the entire entry.
14. Press the
HOLD
key to store the entry. Next PSD bin number displays
15. To set additional PSD names, press the volume up and
down key or press the
HOLD
key to move to the desired
PSD.
Desired PSD bin number displays
16. Repeat steps 11-15 until all PSD names are entered.