Filter
Top Products
Section 700 - Operation Chapter 5. Key Telephone Features
576-13-700 DBS 576 (USA), Revised 6/11/98 185
Related Programming
•N/A
Considerations
•N/A
Speed Dial Name Assignments
You can assign names to PSD numbers from a key telephone without entering the programming
mode. If allowed in the Extension Class of Service (COS), you can also assign names to SSD
numbers.
(PSD names can contain a maximum of 7 characters. SSD names can contain a maximum of 16
characters.)
Operation
PSD Names:
To set PSD names using a large-display or small-display phone:
Action Result
1. Lift the handset or press the
ON/OFF
key.
2. Press the
PROG
key.
3. Press the
*
key.
4. Enter
0
for the PSD Name Assignment mode.
A B C D E F P80
displays (where P80 =
PSD bin 80)
5. Press the up or down arrow key to display the desired PSD
bin number.
A B C D E F PXX
displays (where PXX
= desired PSD bin number)
6. Enter the extension name:
• If using a
large-display phone
, press the soft key next
to the desired row of letters. (See Example 1 on page
186.)
• If using a
small-display phone
press the appropriate
one-touch key. (See Example 2 on page 188.)
Note:
Press the
FLASH
key to clear any existing data
7. Use the bottom row of FF keys to select a single letter.
• See “Example 1. Large-display phone” on page 186.
• See “Example 2. Small-display phone” on page 188.
Notes:
• Press the
*
key to erase a single entry.
• Press the
#
key to enter a space.
8. Repeat steps 6-7 as many times as necessary to enter the
desired PSD name.
Note:
Press the
FLASH
key to clear the entire entry.
9. Press the
HOLD
key when finished. Next PSD bin number displays
10. To enter another speed dial name repeat steps 5-9.