Filter
Top Products
Call Log 93
Call from Call Log
You may find it helpful to place calls from within your Call Log.
Each stored caller number may vary according to the information
associated with that particular call. If the caller number involves a
or PBX system, the first few digits may need to be
“trimmed” to make the caller number dialable. If the number that
you want to call is long distance or uses line pool access, digits
may need to be added to the beginning of the number.
Place a call
1.
Navigate to the log item for the number that you want to dial.
2.
Display the number and edit it if necessary to make it
(the instructions for adding or trimming digits follow).
3.
Press an external line or line pool button.
4.
Lift the receiver. This is not necessary if Handsfree is
programmed at your telephone.
5.
The displayed number is dialed.
Trim a number involving or PBX
To trim the caller number:
1.
Press or once for every digit that you
want to remove.
Add digits for long distance or line pool access
1.
Add digits to the number by pressing the appropriate dial pad
digits, just as you would do to dial.
2.
To remove digits you have added, press or
once for every digit that you want to remove.
PO84262701
DR5.1 Owner’s Handbook