Filter
Top Products
Capabilities 49
Programming hints
The Redirect ring setting has no effect if Disconnect Supervision
is unavailable or was not enabled by your Customer Service
representative. See the System features section of the
Telephone features chapter for more information on Disconnect
Supervision.
Receive tones
The Receive tones setting allows the system to accept and relay
tones to the internal lines. Tones are required if you want to
connect an answering machine or a fax on an internal line. Use
the
display button to select the setting: N (No) or Y (Yes).
Hotline
Hotline automatically calls a pre-assigned number when you lift
the receiver or press
at your telephone. Hotline has
three options:
None,
internal
(Intml),
and external
(Extml).
Internal
assigns an internal number.
External
assigns an external number. If you select an external
number, you can also select the line on which the call is made:
the Prime line, an external line, or a line pool. You will have to
specify the Line Pool Access code for a line pool.
Use the
display button to select the Hotline setting. If you
select
use the button, the display
button, and the dial pad to program the internal number of the
telephone that Hotline calls are to be directed to.
If you select
Extml,
use the button, the
display button, and the dial pad to program the external
telephone number that Hotline calls are to be directed to, and to
program the line Hotline calls are to be made on.
Programming hints
The telephone should be labeled to inform anyone using it that
Hotline is active.
A telephone’s Prime line, line pool access codes, and access to a
line pool can be programmed by your Customer Service
representative.
PO842627 01
Owner’s Handbook