Filter
Top Products
2 /Welcome to
Configuration programming
Configuration programming is usually done for you by the person
who installs the system or by your Customer Service
representative when
is being installed. Specific
system-wide parameters are set up in Configuration.
Assisting your co-workers
It is human nature to ask someone how to do something rather
than read a user guide. You may be asked to demonstrate to
co-workers how to select and use
features. To help you
prepare for that possibility:
Familiarize yourself with the procedures for using
features. Examine the components of your system,
identifying the buttons on the different types of
telephones. Read the Telephone User Cards chapter of this
Guide for more information on each telephone.
Familiarize yourself with the various programming reminders
provided at the end of the Programming chapter of this
Guide. Distribute copies of these reminders to your
co-workers after filling in information such as Call Pickup
group numbers and members.
It is important for everyone in the office to know that you are
knowledgeable about the system and that you are available for
consultation. You may wish to schedule sessions for small
groups or provide individual assistance to co-workers for
programming features on their
telephones.
Your Customer Service representative
Ask your Customer Service representative for the service
department’s telephone number, and write it down. If you have
problems with your
equipment, telephone your Customer
Service representative. If you have problems with programming
or using any of the features, first read the appropriate section of
this Guide and try again before calling your Customer Service
representative.
Owner’s Handbook
PO842627 01
telemanuals.com