Filter
Top Products
Telephone Feature Card
Language
q q
Selects the English language for the telephone display.
Choice
Selects the alternate language for the telephone display.
Moving Line
Buttons
q q
Changes the position of a line button. Remember to switch the
button caps after the line button is moved. Lines cannot be moved
to positions occupied by or
buttons. This feature is not available on the Teleohone.
q
Select the type of calls that will be automatically stored in your
Call Log.
Programming
External Autodial:
Stores a line (optional) or a line pool (optional)
memory
and an external telephone number onto a memory button for
buttons
button access to that number.
Internal Autodial:
Stores an internal telephone number onto a
memory button for one-button access to that telephone number.
Program Features:
Stores a feature onto a memory button for
one-button access to that feature.
[Answer], or cannot be programmed.
Programming a feature button:
Press (For M7100 Telephones, go to step 3.)
2.
Press the memory button you want to program.
3.
Enter the feature code of the feature you want to program.
4. If you entered the Line Pool feature code in step 3, enter the access code for a line pool
immediatelv following the feature code.
Ring Type
Selects a distinctive ring to help differentiate between your
telephone and others nearby. Enter the feature code and press
or through to select the new Ring Type. Press
or to store the new ring.
Ring Volume
Run/Stop
q q
Makes your telephone ring so you can adjust the volume, even
while you are on a call.
When using the External programming feature, inserts a
break point between two or more numbers stored on a memory
button. Press the memory button once to dial the first number; a
second time to dial the second number, and so on.
DR5.1 Owner’s Handbook PO842627 01
telemanuals.com