Filter
Top Products
Feature programming 129
Displays
You will see some of the following displays while programming,
erasing, or checking buttons. A variety of displays appear in
Button Inquiry. See the appropriate feature description in this
chapter for a list of displays pertaining to the use of a feature
programmed onto a memory button.
Press
q
to move either right or left,
or press or to view a
number that is too long to fit on the
display. Press or when
you are finished.
The name of the feature assigned to a
button is displayed when you press
the button.
appears when there
is more information available. Press
q
or additional information.
If you are checking a Speed Dial
button, enter the two-digit Speed Dial
code that you want to check.
This display pertains only to the
Telephone. To erase the
button, press
While entering a feature code you can
press or to quit
programming or to clear out the
characters you have entered. The
system will accept the entry as soon
as you enter a valid feature code.
Press and enter the feature
code you want to program onto the
button. Invalid codes cannot be
entered.
You have programmed a button with a
feature that was already programmed
onto another button. The feature has
moved to the button you just
programmed. Its original button is
blank.
PO842627 01 DR5.1 Owner’s Handbook