Filter
Top Products
34 /Time and date
Time and date
Time and date programming allows you to set the time and date
that is shown on the display when a telephone is not in use. As
with any clock, this needs to be done every time that your office
has a power failure.
Direct-Dial
6.
Service
Modes
I 7. Password
9.
Call Services
Changing the time and date is easy, but there are a couple of
things to remember:
All times and dates must be entered using numerals. For
example, February would be entered as “02”.
The time may be entered in either or 24-hour format. If
the display is in English, and the hour entered is less than
thirteen, the display prompts you to specify or “PM”.
The year is not shown on the telephone display, but make
sure that it is set correctly.
is programmed to allow
for leap years.
DR5.1 Owner’s Handbook
PO84262701