Filter
Top Products
190 Telephone Feature Card
Group
Listening
Allows you to use both the receiver and your speaker at the same
time while you are on a call. Use the Mute feature on the
button to disable the telephone microphone. If you
experience feedback, turn the volume down, and before hanging
up, press
Cancel
q q
Line
Redirection+
Privacy
Redirects one or more lines on your telephone so that calls
coming in on the line(s) are directed to one or more locations
outside the system. This feature is not available on the
Telephone.
Cancel
q
q
Store caller information for the current active call in your Call Log.
Names and numbers for external callers are displayed only if you have subscribed to
Call Display services from your local telephone company.
When Privacy is on, other users with the same line are
prevented from joining your current external call. If Privacy is off,
other users with the same line can join in on your external
call by pressing that line button. Enter the feature code a second
time to restore the orioinal settina.
Transfer
(Feature)
Sends a call to another telephone in your system or
external to
Using Transfer
1.
Make a call, answer a call or take a call off hold.
2. Press (or if programmed).
3.
To transfer within the system: dial an internal telephone number or press an
Internal button.
OR
To transfer external to press a line button and dial the number of the person to
whom you want to transfer the call, or press an External button.
4.
Announce the call after the called party answers and complete the transfer as follows.
OR
If you do not want to announce the call, complete the transfer as follows.
5.
Press or
or a programmed Call Queuing button if you wish to answer
another call.
6. The call is immediatelv transferred.
Transfer using Unsupervised Conference
You can also do an external transfer using Unsupervised Conference:
1.
Establish a Conference call as described in Conference.
2. Press (or if programmed). The other two parties remain
connected.
Note: If an external call is transferred to a busy internal line, or not answered after a few
rings, the call automatically rings you back and the display indicates that the line was
busy or that no one answered.
Some lines may not
support
this feature. See the person who administers your system for more information.
Owner’s Handbook PO84262701