Filter
Top Products
28 System Speed Dial
System Speed Dial Number
System Speed Dial Number lets you assign a System Speed Dial
telephone number to a two-digit code. The System Speed Dial
Number may contain a maximum of 24 digits.
Begin with the display showing
dial.
1.
Press [Show].
The display shows
dial
2.
Select the Speed Dial code you want to program:
Press [Next] until the display shows the correct code.
OR
Enter the two-digit Speed Dial code on the dial pad.
Note: To assign default settings, press
and then
press [Next] to go to the next Speed Dial code.
3.
Press [Show].
4.
Press
For example, the display may show
5.
Enter the new telephone number from the dial pad, including
all digits such as an initial
q
or an area code that must be
dialed to call the number manually. If you need to move the
cursor back, press the
display button.
For example, press
q q q q q
.
The display shows
6.
Press to store the System Speed Dial number.
Programming hints
A
Host System Signaling feature code may be inserted into the
System Speed Dial number. Run/Stop and Pause each use one
character position; Link and Programmed Release each use two
positions.
For more information on using these features in System Speed
Dial programming, see the Host System Signaling section in the
Telephones features chapter.
DR5.1 Owner’s Handbook
PO842627 01