Filter
Top Products
174 System features
Prime line
Your telephone can be programmed to select an internal or
external line or a line pool automatically whenever you lift the
receiver or press
This is your Prime line.
Your Customer Service representative assigns your prime line in
Configuration programming.
Ringing Line Preference
Each telephone in the system can be programmed by
your Customer Service representative to ring or remain silent for
incoming calls on any external lines that appear on the
telephone.
For example, a telephone may have buttons assigned for lines
01 to 03, but have only lines 01 and 02 programmed to ring. An
incoming call on any of the three lines causes a line button
indicator to flash, and the telephone can be used to answer the
call. This is especially useful for people who monitor other
telephone lines, but want only their own lines to actually ring.
If a telephone has an external line as a Prime line, that line is
usually made to ring.
System Speed Dial
Speed Dial codes 01 to 70 are the same for the entire system.
See the Speed Dial section for details.
DR5.1 Owner’s Handbook
PO84262701