Filter
Top Products
30
System Speed Dial
System Speed Dial Name
System Speed Dial Name allows you to assign a name to the
stored System Speed Dial number. When the Display Digits
setting is “No”, the programmed name is shown on the
display when the System Speed Dial feature is used.
The name can be up to 16 characters long. The default name is
the System Speed Dial number; for example,
Dial 02
for
System Speed Dial code 02.
After programming Display digits to N, press
and the
display shows
Name.
1.
Press [Show].
The display shows the assigned or default name.
2.
Press
3.
Enter the first character of the name by pressing the
appropriate dial pad button one, two, three, or four times.
4.
To move the cursor to the next position, press
q
.
Continue entering characters. For more information, see the
Entering names heading in the Programming details section
of this chapter.
Programming hints
You can program System Speed Dial Name only if Display Digits
is set to No.
Bypass Restrictions
Bypass Restrictions allows the System Speed Dial number to
bypass any restrictions in applied Dialing filters. Dialing filters are
programmed in the Capabilities section of Administration
programming.
After programming the System Speed Dial Name, press
and the display shows
or
1.
Press
to change the setting. Options are N (No), and
Y (Yes).
DR5.1 Owner’s Handbook
PO84262701