Filter
Top Products
83
Notes
If the power to your system is off for more than three
days,
numbers may be lost from the memory.
numbers must be programmed onto memory buttons.
They can not be programmed onto external or internal line
buttons, the Handsfree/Mute button, or Answer buttons.
You can program Host System Signaling codes as part of a
number on an External
button. See Host System
Signaling.
If you do not include a line selection in an autodialer, the call will
use your Prime line, if you have one. If you select a line before
pressing the
button, any line selection programmed onto
the button will be ignored.
You can copy the telephone number from a Last Number Redial
button or Saved Number Redial button onto an
button.
Simply enter the Last Number Redial feature code or Saved
Number Redial feature code when the
feature asks you
to enter a number.
You can use the Button Inquiry feature to check the numbers
programmed on your
buttons.
PO84262701
DR5.1 Owner’s Handbook