Filter
Top Products
Capabilities 51
Programming hints
To accommodate the device attached to the you may want
to lengthen or shorten the delay. If a modem or fax machine is
attached to the
you will want to keep the delay short. If a call
to a fax machine or modem cannot be connected, try shortening
the delay. If an individual is dialing the number for a fax machine
or modem, you may want to make the delay a little longer.
Line abilities
Line abilities programming assigns dialing filters to lines.
Line filter
A Line filter is a collection of restrictions and exceptions defined
in a Dialing filter, and applied to an outgoing line. A Line filter on
an outgoing line may be used to limit the capabilities of that line
to carry calls made to specific area codes or destinations.
Use the
display button, and the dial pad to program the
Line filter.
Filter
03 is the default Line filter.
Class of Service (COS) passwords
Class of Service (COS) passwords permit controlled access to a
system’s resources. Class of Service programming defines
passwords, their associated dialing filters and user filters.
A Class of Service can be associated with a telephone, a line or
a COS password. It determines the dialing capabilities that apply
to internal telephones and any lines used for external calls.
Users have a Class of Service associated with their telephones,
in the sense that there are dialing filters associated with
telephones, as well as line pool assignments. Use of a COS
password affects only the telephone’s dialing capabilities.
The ability to change the COS internally means that someone
using another person’s telephone can temporarily change the
restrictions that would normally be applied.
PO842627
01
DR5.1 Owner’s Handbook