Filter
Top Products
Glossary 221
Set Relocation:
See Automatic
Telephone Relocation.
Shift button:
A small triangular
button beside the dual-memory
buttons on the upper half of the
Telephone. Press the
shift button to store or access
features on the top half of the
dual-memory buttons.
Show Time:
A feature that
allows you to see the current
date and time on the
telephone display while you are
on a call.
Station Auxiliary Power
Supply (SAPS):
A device which
provides power to a
telephone that is connected
more than 305 m (1000 and
less than 760 m (2500 ft) from
the Key Service Unit, or to a
CAP module.
Supervised line:
A line for
which disconnect supervision is
enabled. If an external caller
hangs up, the system
detects the disconnection and
hangs up its line also. See
Disconnect Supervision.
System Data:
An option in Set
Copy programming. System
Data refers to the system
settings that apply to all
telephones and lines. System
Data consists of the
programmable settings from
Administration programming
and also includes the settings
programmed by your Customer
Service representative.
System Speed Dial Code:
A
two-digit code (01 to 70) that
can be programmed to dial a
telephone number up to 24
digits long. System Speed Dial
codes are programmed for the
entire
system in
Administration programming.
System Speed Dial Name:
A
sub-heading in Administration
programming under which you
can assign a name to a System
Speed Dial number.
System Speed Dial:
A heading
in Administration programming
under which you can assign up
to 70 numbers as System
Speed Dial numbers.
System Startup:
A procedure
that initializes the system
programming to defaults. When
a system is first installed
and powered up, System
Startup must be performed
before any programming can be
done.
PO842627 01
DR5.1 Owner’s Handbook