Filter
Top Products
56 Service Modes
Manual
allows you to turn the Service Mode on and off at any
time from a Control telephone. The Service Modes feature code
must be entered at the telephone to access this feature.
Automatic
allows you to pre-assign a stop and start time during
which the Service Mode is active. You are still able to start and
stop the Service Mode by entering the Service Modes feature
code at a Control telephone. If you select this setting, you will
have to program start and stop times. See the section in this
chapter on Time and Date for information on programming times.
Off prevents the Service Mode from being activated.
Programming hints
You can only program start and stop times when the Service
Mode is set to Automatic.
Overlapping times may be assigned. For example, if Service
Mode 1 is assigned from 9:00 am to 4:00 pm and Service
Mode 2 is assigned from
pm to pm, then the start time
of the second Service Mode is treated as
a
stop time for the first
Service Mode. This is also true if two Service Modes have the
same start time but different stop times.
If one Service Mode starts and stops within the times of another
Service Mode, the first service temporarily ends when the second
service starts. The first service then resumes when the second
service has ended.
Default stop and start times correspond to typical hours which
may be required for a night Service Mode.
Default Service Mode times
Service Mode
Start time
Stop time
Service Mode 1: Night
Service Mode 2:
23:00
23:00
Service Mode 3: Lunch
DR5.1 Owner’s Handbook
PO842627 01