Filter
Top Products
140 Line Pools
You have tried to access your line
pool, but there are no lines in the line
pool or all the lines are busy. Use Ring
Again or call again later.
Notes
You do not usually need to enter the Line Pool feature code to
use a line pool. Simply dial the line pool access code on an
internal line. If you have no free internal lines, you will need to
use the feature code to get a line pool. You will also need it to
program access to a specific line pool onto a memory button.
You can program a button to access a line pool by programming
the Line Pool feature code and a line pool access code onto a
memory button in Feature programming
q
). When
all the lines in a line pool are busy, the indicator for the Line Pool
button turns on. The indicator turns off when a line becomes
available.
Your
system can have three line pools, and a telephone
can be programmed to access any number of them.
You can use a line pool only to make external calls.
If no lines are available in the line pool, you can use Ring Again
at the busy tone. You will be notified when a line in the line pool
becomes available. See Ring Again.
Your Customer Service representative gives telephones access
to line pools in Configuration programming. Each line pool is
assigned a line pool access code in Configuration programming.
Owner’s Handbook
PO84262701