Filter
Top Products
Transfer 177
Unsupervised Conference
You can create an Unsupervised Conference by dropping out of
a conference you established, leaving the other two to talk to
each other. If both parties are external, certain restrictions apply.
See Notes at the end of this section.
1.
Establish a Conference call as described in Conference.
2.
Press
q
or
(or [Transfer] if
programmed).
If you are unable to establish an unsupervised conference, you
can put the conference on hold. See the Conference section.
Transfer using Hold
Transfer using Hold can only be used to transfer an external call
to another internal telephone that has a button for the line that
the external call is on.
Call the person you want to transfer the call to and tell them there
is a call on hold for them.
Do not enter the Transfer feature
code.
To accept the call, your co-worker presses the line button
with the flashing indicator.
An
Telephone can transfer a call using Hold but it cannot
receive a call transferred in this way.
Displays
see some of the following displays while transferring
calls.
The telephone of the person to whom
you tried to transfer a call already has
the maximum number of calls that it
can handle. Press
to enter a
new internal number. On the M7100
telephone, you will automatically be
returned to the
Transfer
prompt.
PO842627 01
DR5.1 Owner’s Handbook