Filter
Top Products
50 Caoabilities
Priority Call
This feature lets you call from your telephone and
interrupt calls or override Do Not Disturb on another
telephone. Use the display button to select the setting:
N (No) or Y (Yes).
Programming hints
Apply this feature only to telephones from which such
interruptions can be justified.
Allow Last Number Redial
A telephone’s ability to use Last Number Redial can be turned
on or off. Press
to select the setting: N (No) or Y (Yes).
Allow Saved Number Redial
A telephone’s ability to use Saved Number Redial can be turned
on or off. Press
to select the setting: N (No) or Y (Yes).
Allow Link
The ability of a telelphone to use Link (a host system signaling
option) can be turned on or off. Press CHFINGE to select the
setting: N (No) or Y (Yes).
Answer Timer
A timer can be used to administer a delay between the last digit
you dial on a device connected to an analog terminal adaptor
and when the system begins to send out tones
modem) on the outgoing line without capturing and interpreting
them. To change the delay time, press
to select the
setting (in seconds):
Ans timer: 3, 5, 7, or 10.
If the DN you are programming is the internal analog terminal
adapter
you
may also select
Use ringback.
When this
setting is selected, the system’s built-in
detection will be
used to regulate the connection between analog devices.
DR5.1 Owner’s Handbook
PO84262701