Filter
Top Products
46 Caoabilities
Page zone
Each telephone can be assigned to one of three zones for
receiving Page messages. A zone is any selection of
telephones you want to group together, regardless of location.
Use the
display button to select the setting:
1, 2, 3,
or NO.
Programming hints
The Page zone setting has no effect if the telephone has Paging
set to No.
Auxiliary Ringer
This setting causes the Auxiliary Ringer (if installed) to ring when
the telephone rings. An Auxiliary Ringer is important in noisy
environments where a
telephone might otherwise not be
heard. Use the
display button to select the setting: N (No)
or Y (Yes).
Programming hints
To ensure that the auxiliary ringer does not ring for internally
transferred calls, your Installer should program the line setting for
auxiliary ringer to yes under configuration programming. Under
the heading Capabilities in administration programming, set
auxiliary ringer to no. An incoming call on a line programmed to
yes will ring the auxiliary ringer. Once the call is answered and
transferred within the system, the auxiliary ringer will not ring for
a call sent to a telephone that has auxiliary ringer set to no.
Direct-Dial telephone
A telephone can be assigned to call the Direct-Dial telephone
when you dial a single digit. Use the
display button to
select the setting:
or None.
Programming hints
Any number of telephones can be assigned to call a particular
Direct-Dial telephone.
The digit you dial in order to get the Direct-Dial telephone to ring
can be programmed by your Customer Service representative.
Owner’s Handbook
PO84262701