Filter
Top Products
142 Line Redirection
Denied
Displays while redirecting lines
You will see some of the following displays while programming
Line Redirection. The displays you see while canceling
redirection are listed after this chart. See the Dialing section for
displays that occur while entering telephone numbers.
You cannot perform line redirection on
an
Telephone.
You have tried to redirect calls, but
your telephone is not allowed access
to this feature. See the Allow redirect
section in the Programming chapter.
Enter the telephone number to which
you wish to redirect calls using one of
the following methods:
l
Press an External button.
.
Enter an external telephone
number of no more than 24 digits.
Then, press or
l
Press the line
you have chosen as the outgoing
line is a private network line that
does not require you to dial digits.
I
You have tried to program redirection
while someone else is programming
redirection. Only one person can
program Line Redirection at a time.
Press
q
or the button to begin
redirection. Press or
q
to
cancel a previous redirection.
You have one external line on your
telephone, but you need a second line
to perform line redirection. Redirect
your external line using a line pool as
the outgoing line.
Owner’s Handbook
PO84262701